PE Safety Cone – 30 Inch is designed for traffic control, work zones, construction sites, restricted areas and general site-safety applications in Penang.
According to the supplied product information, the PE safety cone has an overall height of 765 mm with a 370 mm × 370 mm square base, providing a practical traffic and area-marking solution for different site requirements.
The PE Safety Cone is a 30 Inch temporary safety and traffic-control product made from PE material. The supplied technical drawing shows an overall height of 765 mm, a cone body height of 725 mm and a square 370 mm × 370 mm base. It may be used for traffic control, work zones, construction sites, parking areas, restricted spaces and general site-safety marking. Contractors, site supervisors and project buyers searching for a 30 Inch Safety Cone, Traffic Safety Cone Penang or Safety Cone Penang can review the confirmed information below before requesting a quotation.
Send your required quantity, intended application and project location directly through WhatsApp.
A traffic safety cone is a temporary visual-control product used to mark or separate areas where additional attention, guidance or temporary access control is required. This PE Safety Cone is supplied in a 30 Inch product format and uses a square base.
The supplied product image visibly shows a red or orange cone body, a white horizontal band and a square base. The white band is described only as a visible product feature; no certified reflectivity rating or night-visibility standard has been supplied.
General uses may include worksites, construction areas, parking areas, temporary traffic-control zones, restricted areas, events and other locations where temporary visual separation or guidance is required.
The confirmed nominal product height is 30 Inch, with a supplied overall height of 765 mm.
The confirmed material for this safety cone is PE.
The supplied drawing shows a square base measuring 370 mm × 370 mm.
The supplied product image shows a red or orange body with a contrasting white horizontal band.
The product may be used to identify temporary restricted, controlled or separated areas.
The product may support temporary traffic control, construction-site marking and work-zone organisation where appropriate.
| Dimension | Supplied Value |
|---|---|
| Nominal Product Height | 30 Inch |
| Overall Height | 765 mm |
| Cone Body Height | 725 mm |
| Top Width | 80 mm |
| Base Size | 370 mm × 370 mm |
| Base Height / Thickness | 40 mm |
The dimensions above are reproduced from the supplied technical drawing without adding unsupported weight, wall-thickness, PE-grade or performance values.
The safety cone is identified as a PE product.
The nominal product height is specified as 30 Inch.
The supplied technical drawing shows an overall height of 765 mm.
The base is shown as 370 mm × 370 mm.
The supplied product image visibly shows a red or orange safety-cone body.
A white horizontal band is visible on the supplied product image, without any separate reflectivity claim.
The cone may be used as a temporary visual marker for traffic or access-control applications.
The product may help identify work zones, restricted areas and temporary safety boundaries.
For temporary visual guidance or separation of vehicle movement where appropriate.
For marking temporary roadside work areas as part of the applicable site traffic-management arrangement.
For visually identifying active work areas, access boundaries or areas requiring attention.
For temporary marking of spaces where entry or movement needs to be controlled.
For temporary vehicle guidance, reserved-space marking or access separation.
For separating temporary access routes, controlled zones or designated movement areas.
For temporary crowd, vehicle or access guidance during event operations where appropriate.
For general visual safety marking around temporary works, maintenance areas or restricted spaces.
Safety cones can help mark temporary work areas, guide vehicle movement, identify restricted spaces, separate temporary access areas and support site organisation. They may also be used to direct pedestrian or vehicle flow where appropriate.
Before ordering, customers should confirm the main project requirement, including:
Traffic cones and other temporary safety posts can differ in height, base size, material, shape, colour, visual marking and intended application. Buyers should therefore confirm the required product configuration before ordering rather than assuming that all safety cones are identical.
For this PE Safety Cone, the supplied dimensions are 30 Inch nominal height, 765 mm overall height, 725 mm cone body height, 80 mm top width, 370 mm × 370 mm base size and 40 mm base height or thickness.
The supplied product information also shows separate safety products including PE Safety Triangular Post – 24 Inch and PE Safety Square Post – 18 Inch. These are separate products and their dimensions are not included in the PE Safety Cone specification above.
SHIN HUAT TRADING & ENGINEERING SDN. BHD. was established in 1995 and is based in Penang, Malaysia.
Company Registration No.: 199501030600 (359806-X)
Business areas include hardware, building materials, engineering supplies, safety products, piping products and related industrial products.
Contractors, construction companies, site supervisors, property-management teams, industrial facilities, event organisers, purchasing teams and project buyers searching for Safety Cone Penang, PE Safety Cone Penang, Traffic Cone Penang, 30 Inch Safety Cone Penang, Traffic Safety Equipment Penang, Road Safety Cone Penang, Construction Safety Cone Penang or Work Zone Cone Penang can send their requirements for quotation.
A useful enquiry should include the required quantity, 30 Inch requirement, intended application, project location and any related traffic, work-zone or other safety-equipment requirements.
This sample testimonial demonstrates how a construction enquiry could describe the product information. The 30 Inch nominal height, 765 mm overall height and 370 mm square base are easy to identify. The page also separates confirmed dimensions from information that has not been supplied, helping a buyer understand what is known before discussing quantity and intended site application.
This placeholder review illustrates how a purchasing team might use the page before making an enquiry. The dimensions and general traffic, work-zone and site-safety applications are presented clearly, while the quotation section explains which details to send. This can help buyers prepare the required quantity, application and project location without relying on unsupported performance or certification claims.
This sample review shows how a site-safety enquiry could be prepared more efficiently. The buyer can first confirm whether the 30 Inch cone format suits the intended temporary marking requirement and then send the required quantity and site information. Having the general work-zone and restricted-area applications on the same page also makes the initial discussion more straightforward.
This placeholder testimonial demonstrates a professional B2B presentation for contractors and purchasing teams. Confirmed product dimensions are shown separately from unsupported performance information, while the application section explains practical temporary-use contexts. The format can help a buyer compare the product requirement against a construction or building-site need before requesting further information.
This sample testimonial illustrates how an industrial buyer could prepare a quotation request through WhatsApp. Providing the required quantity, 30 Inch requirement, intended application, project location and any related work-zone or safety-equipment requirement can keep the enquiry organised. It also allows the buyer to distinguish this PE Safety Cone from other safety-post products shown separately in the product information.
Send your required quantity, 30 Inch requirement, intended application, project location, traffic / work-zone requirement and other safety equipment required.
