DVC Resilient Seated Gate Valve is designed for water and sewage pipeline applications, with pressure ratings of PN10 and PN16 and a size range from DN50 to DN600.
According to DVC product literature, available operation options include manual, electric actuator, hydraulic / pneumatic cylinder, bevel gear and spur gear configurations for different project requirements.
The DVC Resilient Seated Gate Valve is a pipeline valve range available in PN10 and PN16 pressure ratings with a confirmed size range from DN50 – DN600. The valve range is presented for water and sewage applications, with manual and other operation options referenced in DVC product literature. Contractors, engineers and project buyers looking for a DVC Gate Valve Penang, PN10 Gate Valve or PN16 Gate Valve can review the confirmed information below before making an enquiry.
Send your required size, pressure rating, quantity, application and operation requirement through WhatsApp.
A resilient seated gate valve is used within pipeline systems to control flow by opening or closing the pipeline passage. The DVC valve range covered here is available in PN10 and PN16 pressure-rating options and in sizes from DN50 to DN600.
Confirmed primary applications include water and sewage. According to DVC product literature, operation possibilities include manual operation, electric actuator, hydraulic or pneumatic cylinder, bevel gear and spur gear configurations depending on project requirements.
The appropriate size, pressure rating, operation method and connection requirements should be reviewed against the actual pipeline design before ordering.
The confirmed size range allows buyers to review different nominal valve sizes against pipeline requirements.
PN10 and PN16 pressure-rating options are available within the confirmed DVC product information.
The valve range is presented for water and sewage pipeline applications.
DVC literature references manual, electric actuator, hydraulic or pneumatic cylinder, bevel gear and spur gear operation options.
Spur gearboxes and bevel gearboxes are referenced as optional items rather than standard included equipment.
DVC product literature references epoxy corrosion resistant coating and bitumen as protective finish options.
PN10
PN16
The required pressure rating should be selected according to the relevant project design and pipeline requirements.
DN50 – DN600
Exact model-specific dimensions, weight, flange holes and face-to-face dimensions should be confirmed separately where required.
Manual operation is referenced as one of the operation options within DVC product literature.
An electric actuator may be considered as an operation option depending on the selected valve configuration and project requirements.
DVC literature references hydraulic or pneumatic cylinder operation for applicable project configurations.
Bevel gear operation is listed in the DVC product literature as an available operation option depending on project needs.
Spur gear operation is also referenced for configurations where a geared operation method is required.
Spur gearboxes are referenced as an optional configuration in DVC product literature.
Bevel gearboxes are listed as optional items for configurations where applicable.
By-pass valves are referenced as optional items and should not be assumed to be included as standard.
According to DVC product literature, epoxy corrosion resistant coating is one of the referenced protective finish options.
Bitumen is also referenced in the DVC product literature as a protective finish option.
Finish selection may depend on the specific valve configuration and project requirement. No coating thickness, colour or certification details are stated here.
For pipeline systems carrying water where size, pressure rating and connection requirements match the project design.
For sewage pipeline applications where a resilient seated gate valve is specified and technical compatibility is confirmed.
For industrial pipeline systems requiring valve isolation or flow control according to project requirements.
For building services and commercial project pipeline applications where the selected valve specification is appropriate.
For infrastructure pipeline applications requiring gate valve sizes within the confirmed DN50 – DN600 range.
For utility network applications where the project specifies compatible valve size, pressure and operation requirements.
For building services systems that require suitable pipeline isolation valves as part of the engineering design.
For water distribution networks where the selected PN rating, DN size and valve configuration match system requirements.
According to the DVC product literature, the valve range references standards including the following:
These are presented as product-literature references only. They should not be interpreted as confirmation that every model is independently certified or approved to every listed standard.
A gate valve should be selected against the actual pipeline and project specification rather than by product name alone. Buyers should confirm the DN size, PN pressure rating, water or sewage application, flange and connection requirements, operation method, actuator requirements, optional gearbox requirements and protective finish.
Providing these details during the enquiry helps ensure that the requested DVC gate valve configuration can be reviewed against the relevant project requirements before quotation or purchase.
SHIN HUAT TRADING & ENGINEERING SDN. BHD. was established in 1995 and is based in Penang, Malaysia.
Company Registration No.: 199501030600 (359806-X)
The company's business areas include hardware, building materials, piping products, engineering supplies, valves, HDPE products and related industrial products.
Contractors, engineers, developers, building services companies, water system contractors, infrastructure contractors, purchasing teams and industrial buyers searching for a DVC Gate Valve Penang, DVC Resilient Seated Gate Valve Penang, PN10 Gate Valve Penang, PN16 Gate Valve Penang, Industrial Valve Penang, Water Valve Penang or Sewage Valve Penang can use the confirmed information on this page to prepare a more complete enquiry.
Buyers should provide the required DN size, PN10 or PN16 rating, quantity, application, preferred operation method, actuator requirement, project location and other relevant technical specifications.
This sample review demonstrates how a purchasing enquiry could describe the valve information. The PN10 and PN16 options, DN50 – DN600 size range and water or sewage applications are presented clearly. This type of product page can help buyers identify the main requirements they need to confirm before contacting Shin Huat with a more complete valve enquiry.
This placeholder testimonial illustrates an engineering-focused enquiry. The page separates confirmed product data from items that still require project verification. Information about pressure rating, nominal size, operation method and optional accessories can help an engineering team prepare the relevant questions before discussing the actual valve configuration required for a pipeline system.
This sample review shows how a contractor might describe the enquiry process. It is useful to have the DN range, PN10 and PN16 options, water or sewage application and operation choices available in one place. The contractor can then provide the required valve size, pressure rating, quantity and preferred operation method for a more focused project discussion.
This sample content demonstrates a professional B2B review style for building services enquiries. The technical presentation focuses on confirmed valve information without introducing unsupported dimensions or performance figures. Contractors, engineers and purchasing teams can review the available pressure ratings, operation options, accessories and application categories before submitting their own project specification for further confirmation.
This placeholder testimonial illustrates how an industrial buyer might describe the quotation process. WhatsApp provides a convenient way to submit the required DN size, PN10 or PN16 requirement, quantity, pipeline application, operation method and project location. Preparing these details in advance can help keep the enquiry structured when discussing the relevant DVC gate valve configuration.
Send your required size, PN10 / PN16 requirement, quantity, water / sewage application, operation requirement, actuator requirement, project location and other technical specifications.